HAUPPAUGE WINTV HVR 1950 TV

NTSC Analog CableTV or over-the-air analog TV: You can use your cable TV from the wall to connect to the WinTV-HVR-1950 and receive all of your basic Cable TV channels. Note: High definition QAM and ATSC video is not compatible with DVD disks

Optional DVD burner for creating DVDs from your recordings.

HAUPPAUGE WINTV HVR 1950 WINDOWS 7

WinTV-HVR-1955 is Windows Vista Premium certified* and has passed Windows 7 and 8 WHQL testing.

HAUPPAUGE WINTV HVR 1950 PRO

Windows 10, 8 and 7 (32 or 64 bit), Microsoft® Windows® XP, XP Pro or Windows XP Media Center Edition, with Service Pack 2 or Windows Vista (32 bit).

2.2 GHz Intel P4 or equivalent (for watching high definition ATSC or QAM digital TV).

1.0 GHz Intel P4 or equivalent (for watching cable TV).

Power: 1V to 12V at 1.66 amps (supplied power supply is 6v at 1.66amp).

Size: 10cm wide x 10.4 cm deep x 2.8cm high.

Clear QAM digital cable TV, at video resolutions to 1080i.

ATSC over-the-air digital TV, at video resolutions to 1080i.

NTSC analog TV, with built-in hardware MPEG-2 encoder.

Single tuner with the following broadcast formats supported:.

Not all included applications on the enclosed installation CD are currently certified for use with Windows Vista.

For use with Windows 8, 1 and Vista, the WinTV-HVR-1950 can be used with Microsoft’s Media Center application.

ATSC TV recordings are not 100% compatible with DVD, and therefore you cannot burn them directly to a DVD.

Note: the enclosed remote control is not MCE certified and does not replace the Media Center remote control. The Windows Media Center application is included with Windows XP Media Center, Windows Vista Ultimate, and Windows Vista Home Premium editions only. If you are building a Media Center PC, check Microsoft’s website for a list of Media Center certified DVD decoders.

HAUPPAUGE WINTV HVR 1950 SOFTWARE

To use the WinTV-HVR-1955 for TV with the Windows Media Center application, a Media Center certified DVD or MPEG-2 software decoder should be standard in your Media Center PC.

Note: depending on the strength of your antenna, you might not be able to receive all broadcasts listed at TitanTV.

To check the ATSC TV broadcasts in your area, go to and enter your postal code.

For ATSC over-the-air digital TV reception, a high-gain antenna is recommended.

Channel changing will be done using the IR Blaster. If you have a digital cable set-top box or a satellite box, the WinTV-HVR-1955 can connect via either Composite or S-Video inputs.

For analog cable TV reception, you need an analog cable TV connection.

To watch clear QAM channels, you should use either the Hauppauge WinTV v7 or v8 application or Windows Media Center from Windows 7.

For more information, contact your cable TV provider.

Clear QAM digital cable TV channels are not available on all cable networks.

High Definition TV recordings typically consume 5GB of disk space per hour. NTSC is the analog cable TV standard for North America.ĪTSC is the over-the-air digital HDTV standard for North America and typically requires an antenna for reception.Ĭlear QAM digital cable allows users to watch unencrypted HDTV stations from their cable TV provider without a set-top box.Īnalog TV recordings typically consume 1.5GB of disk space per hour. Supports the following TV formats: NTSC Analog TV, ATSC Digital TV and Clear QAM Digital Cable TV:

Hauppauge wintv-hvr-1950